Recording

[Burst]

Applicable modes:

Pictures are taken continuously while the shutter button is pressed.

 

 

 

 

 

 

Settings

Description of settings

Number of

 

 

 

 

 

 

recordable

 

 

 

 

 

 

 

 

pictures

 

 

 

 

 

 

 

The focus is adjusted for each picture recorded in

 

[

 

 

]

([2 fps

the burst.

max.

 

 

 

 

 

 

AF-Continuous])

The Burst speed changes according to the recording

100 pictures¢

 

 

 

 

 

 

 

 

 

 

 

 

 

conditions.

 

[ 10

 

 

 

]

([10 fps AF-Single])

The focus, exposure and White Balance are fixed to

max.

 

 

 

 

 

 

 

 

 

the settings for the first picture.

10 pictures

Burst speed: approx. 10 pictures/second

This option is available only in Program AE Mode, Aperture-Priority AE Mode or Shutter Priority AE mode.

The picture size is fixed to 3M (4:3), 2.5M (3:2), 2M (16:9) or 2.5M (1:1).

The Burst speed changes according to the recording

 

conditions.

max.

[

] ([Hi-Speed Burst]) The number of Burst recording pictures may

200 pictures¢

 

increase when you use a card with fast writing

 

 

speed or card is formatted.

 

The focus, zoom, exposure, White Balance, shutter speed and ISO sensitivity are fixed to the settings for the first picture.

The ISO sensitivity is automatically adjusted. However, the ISO sensitivity is increased to make the shutter speed become high-speed.

Still pictures are taken continuously with flash.

This option is available only in Program AE Mode, Aperture-Priority AE Mode or Shutter Priority AE

[ ]

([Flash Burst])

mode.

max. 5 pictures

Settings for focus, zoom, exposure, shutter speed,

 

 

 

 

 

ISO sensitivity, flash output are fixed to the first

 

 

 

picture.

 

 

 

The flash setting is fixed to [].

 

[OFF]

 

¢The number of Burst recording pictures are limited by the picture-taking conditions and the type and/or status of the card used.

- 98 -

Page 98
Image 98
Panasonic DMC-ZS35 owner manual Burst, Settings Description of settings Number, Flash setting is fixed to ‰