- 30 -
Basic
∫[Motion Deblur]
When [Motion Deblur] is set to [ON], [ ] is displayed on the recording screen.
The camera automatically sets an optimal shutter speed according to the motion of the subject
to reduce blur on the subject.
•It is initially set to [ON] on the came ra.
∫[iHandheld Night Shot]
When [iHandheld Night Shot] is set to [ON] and [ ] is detected while taking handheld night
shots, pictures of the night scenery will be taken at a high burst speed and composed into a
single picture.
This mode is useful if you want to take stunning night shots with minimal jitter and noise,
without using a tripod.
If the camera is mounted on a tripod or other type of stand, [ ] will not be detected.
•It is initially set to [ON] on the came ra.
∫[iHDR]
When [iHDR] is set to [ON] and there is, for example, strong contrast between the background
and the subject, multiple still pictures are recorded with differing exposures and combined to
create a single still picture rich in gradation.
•It is initially set to [ON] on the came ra.
•In the case that a single picture is going to be composed from a burst, a message indicating that
multiple pictures are to be recorded appears on the screen and burst recording is carried out. Note
that burst recording will not take place if the camera determines that it can compensate for the
difference in contrast without composing the picture from a burst.
•In the case of composition from a burst, ghost images may appear if the subject was moving.
•In the following cases, a combined picture is not created.
–When the zoom factor exceeds 20k.
–When recording in [Burst].
–When the flash is activated .
•When [ ] is selected, [ ], [ ], [ ] or [ ] is set depending on the type of subject and
brightness.
•When [ ], [ ] is set, [Red-Eye Removal] is enabled.
•Shutter speed will be slower during [ ] or [ ].
Menus specific to Intelligent Auto Mode
About the flash (P59)