Panasonic DMC-ZS35 owner manual 129, Changing the connection method

∫Changing the connection method

To change the connection method, press [DISP.], and then select the connection method.

Wi-Fi

Please set on your smartphone

Please scan the QR code using "Image App", or enter the password into Wi-Fi settings

SSID:

Password:

DISP. Change method Cancel

Select connection method

Connect to the	Via Network
network (AP)	Direct

Cancel Select Set

When connecting with [Via Network]: (On the camera)

1Press 3/4 to select [Via Network], and then press [MENU/SET].

•Follow the connection procedure described on P144 to connect the camera to a wireless access point.

(On your smartphone/tablet)

2Turn on the Wi-Fi function.

3Connect the smartphone/tablet to the wireless access point to which the camera is connected.

4Start “Image App”. (P125)

When connecting with [WPS Connection]¢ in [Direct]: (On the camera)

1Press 3/4 to select [Direct], and then press [MENU/SET].

•Follow the connection procedure described on P146 to connect the camera to the smartphone/ tablet.

(On your smartphone/tablet)

2Start “Image App”. (P125)

¢WPS is a function that allows you to easily set up a connection with a wireless LAN device and make security-related settings. To check whether your smartphone/tablet supports the function, refer to the operating instructions of the smartphone/tablet.

∫Terminating the connection

After use, terminate the connection to the smartphone/tablet. Once turning off the connection, you can perform normal recording and playback.

1Press [ ].

•Confirmation screen is displayed.

It is executed when [Yes] is selected.

2On the smartphone/tablet, close “Image App”.

(If you are using an iOS device)

On the screen of “Image App”, press the home button to close the app.

(If you are using an Android device)

On the screen of “Image App”, press the return button twice to close the app.

- 129 -