Wi-Fi

Sending selected images ([Send Images Stored in the Camera])

1Press [Wi-Fi].

2Press 3/4/2/1 to select [New Connection], and then press [MENU/SET].

3Press 3/4 to select [Send Images Stored in the Camera], and then press [MENU/

SET].

4Press 3/4 to select [PC], and then press [MENU/SET].

5Press 3/4 to select [Via Network] or [Direct], and then press [MENU/SET].

For details on the connection methods, refer to P143.

6Press 3/4 to select the PC you want to connect to, and then press [MENU/SET].

When the PC you want to connect to is not displayed, select [Manual Input], and enter the computer name of the PC (NetBIOS name for Apple Mac computers).

7Press 3/4 to select the destinations folder of the PC, and then press [MENU/SET].

When the connection is complete, the screen is displayed. To change the send setting, press [DISP.]. (P150)

8Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].

To change the setting or disconnect, press [Wi-Fi]. (P123)

[SINGLE] setting

1Press 2/1 to select the picture.

2 Press [MENU/SET].

[MULTI] setting

 

 

 

1 Press 3/4/2/1 to select the picture, and then press

 

 

 

[DISP.]. (repeat this step)

1

2

3

The setting is canceled when [DISP.] is pressed again.

4

5

6

2 Press [MENU/SET].

 

 

 

The number of pictures that can be sent by [MULTI] is

 

 

 

limited.

 

 

 

Confirmation screen is displayed. It is executed when [Yes] is selected.

Folders sorted by the sent date are created in the specified folder, and pictures are saved in those folders.

If the screen for a user account and password entry appears, enter the one you set on your PC.

To send an image to another user account, turn off and on the camera.

When the computer name (NetBIOS name for Apple Mac computers) contains a space (blank character), etc., it may not be recognized correctly.

If a connection attempt fails, we recommend that you change the computer name (or NetBIOS name) to the one consisting of only alphanumeric characters, with a maximum of 15 characters.

- 138 -

Page 138
Image 138
Panasonic DMC-ZS35 owner manual 138, Press 3/4 to select Single or Multi and then press MENU/SET