∫Still Mode (paused video)
Select the type of picture shown when you pause playback.
Auto | Automatically selects the type of | |
picture shown. | ||
| ||
Field | Select if jittering occurs when “Auto” is | |
selected. | ||
| ||
Frame | Select if small text or fine patterns cannot | |
be seen clearly when “Auto” is selected. | ||
| ||
|
|
∫Seamless Play
The chapter segments in playlists are played seamlessly.
≥Select “On” when the picture freezes for a moment at the chapters segment in playlists.
Audio
∫Sound Effects 
(> 27)
∫Dialog Enhancer 
(> 27)
∫Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥“Auto” is effective only when playing Dolby TrueHD.
∫Digital Audio Output
Tap to show the following settings:
¾Dolby D/Dolby D +/Dolby TrueHD
¾DTS/DTS-HD
Select the audio signal to output.
≥Select “PCM”, when the connected equipment cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment.
≥Not making the proper settings may result in noise.
¾BD-Video Secondary Audio
Select whether or not to mix the primary and secondary audio (including the button click sound).
If “Off” is selected, the unit outputs the primary audio only.
¾HDMI Audio Output
This setting selects whether or not to output audio from HDMI.
≥Select “Off” when the TV is connected to this unit via HDMI AV OUT, and this unit is also connected to other devices, such as an amplifier/receiver via DIGITAL AUDIO OUT.
∫PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz for the PCM output from the
DIGITAL AUDIO OUT.
≥If “On” is selected, the signals that are converted to 48 kHz are output.
≥If “Off” is selected, and the connected equipment does not support 96 kHz, the sound will not be output normally.
≥Signals are converted to 48 kHz despite the settings in the following cases:
–when the signals have a sampling frequency of 192 kHz
–when the disc has copy protection
–when
∫Downmix
Select the downmix system of
≥Select “Surround encoded”, when the connected equipment supports the virtual surround function.
≥There is no effect on “Bitstream” via HDMI AV OUT and DIGITAL AUDIO OUT.
≥The audio will be output in “Stereo” in the following cases:
–AVCHD playback
–Playback of secondary audio (including the button click sound).
Settings
VQT3W08 29
