Control reference guide
1
|
|
| 7 |
2 | INTERNET |
| 8 |
3 | HOME | KEYS | 9 |
4
5 |
| OPTION | RETURN | 10 |
6 | R | G | B Y |
|
|
|
|
|
1Turn the unit on and off
2Show the Home screen of the VIERA Connect (> 22)
3Show HOME menu (> 17)
4Touchpad (> 8)
Used for various operation
Move the highlight, confirm the selection, etc.
5Show Option menu (> 25)
6Colored buttons
Used for various purposes depending on the display
7Show NETFLIX screen (> 22)
8Start up a video communication (> 22)
9Show KEYS screen on the screen (> 9)
10Return to previous screen
Getting started
Indicator LEDs
7 8 9 10 11
2
1
3
5 6
Pull to flip down the panel.
1Standby/on switch* (Í/I) (> 14)
Touch to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
2Disc slot (> 17)
3Eject the disc*(> 17)
4Remote control signal sensor
One of the two sensors will operate depending on the installation method of the main unit.(> 10)
Distance: Within approx. 7 m (23 feet) Angle (Against front of the sensor): Approx. 20e up and down, 30e left and right
5SD card slot (> 17)
6USB port (> 17)
7Status LED (blue/red)
≥This will light up in blue when the unit is turned on.
≥Blue and red will light up simultaneously when an error occurs. (> 34)
≥This will flash in blue when this unit receives incoming call etc. of the video communication. (> 22)
8Standby/on LED (red/green)
This indicator lights red in standby mode and lights green when the unit is turned on. It is also possible to set to turn off when the unit is in standby mode. (> 33, “Standby LED”)
9CALL LED (blue)
The LED will light up when this unit receives incoming call etc. of the video communication. (> 22)
10ACCESS LED (amber)
This will flash while accessing the SD card or USB device.
11INFO LED (red)
This will light up at the time of error, etc. (> 34)
*These switches work just by touching the marks. Be careful not to touch them unintentionally.
The volume of operation sound can be adjusted by “Unit Operation Sound”. (> 33)
VQT3W08 7
