Specifications
Signal system: |
| PAL/NTSC |
Operating temperature range: | i5 oC to i35 oC | |
Operating humidity range: |
| |
Video output: | 10 % to 80 % RH (no condensation) | |
1.0 | ||
Component video output (Y: green, PB: blue, PR: red):
Y:1.0
Audio output: | 2 Vrms (1 kHz, 0 dB)/Pin jack |
Number of connectors : |
|
7.1channel discrete output:1 system (2 channel + 5.1 channel discrete output)
Digital audio output:
Optical digital output : Optical terminal Coaxial digital output:Pin jack
HDMI AV output:Type A (19 pin) HDMI (Deep Colour, x.v.Colour™, High Bit rate Audio)
This unit supports “HDAVI Control 5” function.
SD card slot: | Connector : 1 system |
USB slot: | USB2.0 : 2 system |
Ethernet: | |
LASER Specification |
|
Class 1 LASER Product:
Wave length:790 nm (CDs)/655 nm (DVDs)/405 nm (BDs) Laser power: No hazardous radiation is emitted with the
Power supply: | safety protection |
[For[Australia[and[New[Zealand] | |
| AC 220 to 240 V, 50 Hz |
| [For]Asia]and]Middle]East] |
Power consumption: | AC 220 to 240 V, 50 Hz/60 Hz |
Approx. 27 W |
Power consumption in standby mode: Approx. 0.2 W Power consumption in quick start standby mode:Approx. 8.4 W Dimensions (WkDkH) : Including the projecting parts
Mass: | 430 mmk249 mmk55 mm |
Approx. 2.6 kg |
[For[Australia[and[New[Zealand] |
|
Wireless LAN Adaptor |
|
Dimensions (WkDkH) | 44 mmk72 mmk27 mm |
Mass: | Approx. 29 g |
Antenna: | Tx 1, Rx 2 |
Interface: | USB2.0 |
Standard Compliance: |
|
IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b
Transmission system:
Frequency Range:
IEEE802.11n / IEEE802.11a:
5.15 GHz - 5.35 GHz / 5.47 GHz - 5.725 GHz/
|
| 5.725 GHz - 5.825 GHz | |
IEEE802.11g / IEEE802.11b / IEEE802.11n: |
| ||
Transfer rate (standard)*: | 2.4 GHz - 2.4835 GHz | ||
|
| ||
IEEE802.11n: | Tx Max. 150 Mbps, Rx Max. 300 | Mbps | |
IEEE802.11g / IEEE802.11a: | Max. 54 | Mbps | |
IEEE802.11b: |
| Max. 11 | Mbps |
Access Mode: |
| Infrastructure mode | |
Security: |
| ||
|
|
| |
|
| WEP (64 bit / 128 bit) | |
(This unit supports WPA and WPA2 encryption.)
*Transfer rates are theoretical values; however, actual communication rate will vary according to communication environment or connected equipment.
Product Identification Marking is located on the bottom of adaptor.
Specifications are subject to change without notice.
Reference
39
VQT2H83
