Panasonic DMP-BD85 Connecting to a TV, Highest Quality Video, Standard Quality Video

STEP 1 : Connecting to a TV

≥Do not place the unit on amplifiers/receiver or equipment that may become hot. The heat can damage the unit.

≥Before making any connections we suggest you temporarily disconnect all the units from AC power.

≥Do not connect video signals through a video recorder. Due to copy guard protection the picture may not be displayed properly.

≥Refer to page 36, about recommended settings for each piece of connected equipment.

Highest Quality (VIDEO)

≥Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters or less.

Recommended part number:

RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.

Standard Quality (VIDEO)

∫Via an HDMI AV OUT terminal

HDMI IN

HDMI cable

∫Via a COMPONENT VIDEO OUT terminal

COMPONENT		AUDIO IN
	VIDEO IN		R	L

Component	Audio/Video
Video cable	cable
	(supplied)

∫Via a VIDEO OUT terminal

AUDIO IN

R L VIDEO IN

Audio/Video cable (supplied)

≥The HDMI connection supports VIERA Link “HDAVI Control” (> 22) when used with a compatible Panasonic TV.

≥Set “HDMI Video Mode” and “HDMI Audio Output” to “On” (> 30).

≥Connect terminals of the same colour.

≥Set “Component Resolution” to “576p/480p”, “720p” or “1080i”. (> 30)

≥Set “HDMI Video Mode” to “Off” (> 30).

≥Connect terminals of the same colour.

8

VQT2H83