24 VQT4V11
Setup menu
Change the unit’s settings if necessary. The settings
remain intact even if you switch the unit to standby.
Some items in the Setup menu are common to
the Option menu. You can get the same effect
with both menus.
About Multi User Mode
: Settings of the items with this ind i cation are saved
by the respective users registered in the HOME menu.
Please refer to page 16 for details about user
registration and switching.
1While displaying the HOME menu, press
[SETTINGS].
2Select an item and change the settings.
To exit the screen
Press [HOME].
∫Picture Mode (>23)
∫Picture Adjustment (>23)
∫HDMI Output
Press [OK] to show the following settings:
¾HDMI Resolution
The items supported by the connected devices are
indicated on the screen as “
¢
”. When any item
without “
¢
” is selected, the images may be distorted.
≥If “Auto” is selected, the best suited output
resolution to the connected TV is
automatically selected.
≥To enjoy high-definition video up-converted to
1080p, you need to connect the unit directly
to 1080p compatible HDTV (High Definition
TV). If this unit is connected to an HDTV
through other equipment, the other equipment
must also be 1080p compatible.
¾24p Output
When this unit is connected to a TV supporting
1080/24p output, movies and other material
recorded at 24p* are output at 24p.
≥
When playing DVD-Video, set to “On” and then set
“24p” in “Video Settings” (
>
23) to “On”.
≥When BD-Video/DVD-Video images other
than 24p are played, images are output at
60p.
¾Deep Color Output
This setting is for selecting whether to use Deep
Color output when a TV that supports Deep
Color is connected.
¾Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
* A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
∫Dialog Enhancer (>23)
∫Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥“Auto” is effective only when playing Dolby
TrueHD.
∫Digital Audio Output
Press [OK] to show the following settings:
¾Dolby D/Dolby D +/Dolby TrueHD
¾DTS/DTS-HD
Select the audio signal to output.
≥
Select “PCM”, when the connected equipment
cannot decode the respective audio format. Thi s
unit decodes the audio format and transmits to the
connected equipment.
≥
Not making the proper settings may result in noi se.
¾BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click sound).
If “Off” is selected, the unit outputs the primary
audio only.

Video

OK
RETURN
Player Settings
System
Ratings
Network
Language
Audio
Video
HDMI Output
Picture Adjustment
Picture Mode Normal

Audio

DMP-BD89_79_VQT4V11_eng.book 24 ページ ２０１２年１２月１７日　月曜日　午前９時１３分