Video is not output.
¾Set “High Clarity Sound” in the Setup menu to “Disable” to use the VIDEO OUT terminal. (> 32)
Video is not output in
¾Confirm that “HDMI Video Format” in the Setup menu is set properly. (> 30)
3D video is not output.
¾Change the settings as required by the connected TV format. (> 32, “3D Type”)
¾Is there a
¾Are the settings on this unit and the TV correct? (> 21)
¾Is the amplifier/receiver that is connected between this unit and TV on?
¾Depending on the connected TV, the video being played back might switch to 2D video due to changes in resolution etc. Check the 3D setting on the TV.
3D video is not output correctly as 2D.
¾Select “Set before play” in the Setup menu, and select “2D Playback” in the setup screen displayed when playing 3D discs. (> 32, “3D
¾Discs that have recorded titles with Side by side (2 screen structure) and that can be enjoyed in 3D are played back in accordance with the settings of the TV.
A black band is displayed around the edge of the screen.
The aspect ratio of the screen is abnormal.
¾Confirm the “TV Aspect” is set properly. (> 34)
¾Adjust the aspect setting on the television.
Audio
Cannot switch audio.
¾When connecting an amplifier/receiver using an OPTICAL terminal or an HDMI terminal, you cannot switch the audio if “Digital Audio Output” is set to “Bitstream”. Set “Digital Audio Output” to “PCM”. (> 31)
Cannot hear the desired audio type.
¾Check the connections and the “Digital Audio Output” settings. (> 12 , 31)
¾To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to “On” in the Setup menu. (> 31)
38 VQT3V87
