Panasonic DP-1510P manual Manual Skyshot Mode, Platen Upper- left corner

Other Features

Skyshot Mode

■Manual Skyshot Mode

When using this function, the custom size should be registered into memory (M1, M2) in advance. (See page 32)

Platen

Upper- left corner

1 2 3 4

Place the	Select the Custom	Number of	Press
Original	Size (M1 or M2)	Copies	START

#Press the FUNCTION key.

2

FUNCTION MODE (1-2) ENTER NO. OR ∨ ∧

2:COPIER SETTINGS PRESS SET TO SELECT

COPIER PARAM. (00-14) ENTER NO._ OR ∨ ∧

07 MANUAL SKYSHOT 1:OFF

$Press the 2 key to select COPIER SETTINGS.

%Press the SET key.

&Press 7 and SET key to select MANUAL SKYSHOT.

(Press 2 or 3 key to select the Custom Size.

1: OFF	NONE
2: M1 ON	M1 size is ON*
3: M2 ON	M2 size is ON*
4: M1, M2 ON	Both sizes are ON

	)Press the SET key.
	*Press the RESET key.
NOTE	∗ The default size for M1 is: 70(X) ⋅ 160(Y) mm, and M2 is: 95(X) ⋅ 220(Y) mm
	CWhen changing the M1 or M2 size, consult with the key operator.
	CWhen using the Manual Skyshot mode, M1 and M2 are turned ON and other
	job memory cannot be used.
	CPress the RESET key to cancel all job settings.

26