DVC20_Eng.book 24 ページ 2005年10月31日 月曜日 午前10時36分

Record mode

Manual focus adjustment

If auto focusing is difficult due to the conditions, then manual focusing is available.

Set to Tape Recording Mode.

1Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL].

AUTO

MANUAL

FOCUS

2Set the [AUTO/MANUAL/FOCUS] switch to [FOCUS].

AUTO

MANUAL

FOCUS

MNL

MF

The MNL and the manual focus indication [MF] will be displayed.

3Rotate the focus ring to adjust the focus.

When focused with a wide angle, the subject may not be in focus when zoomed in. First, zoom in on the subject, and then focus on it.

ªTo restore to the automatic adjustment

Set the [AUTO/MANUAL/FOCUS] switch to [AUTO] or [FOCUS].

Manual shutter speed/aperture adjustment

Shutter Speed

Adjust it when recording fast-moving subjects.

Aperture

Adjust it when the screen is too bright or too dark. Set to Tape Recording Mode.

1Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL].

AUTO

MANUAL

FOCUS

2Press the [4] button until the shutter speed indication or aperture value indication appears.

 

 

 

MNL

 

 

 

1/60

 

 

 

OPEN

 

 

 

OdB

1)

MNL

2)

MNL

 

1/1000

 

1/60

 

 

F2.0

 

 

 

 

 

 

0dB

1)Shutter speed

2)(Aperture) Iris/gain value

3Press the [2] or [1] button in order to adjust the shutter speed or aperture.

ªTo restore to automatic adjustment

Set the [AUTO/MANUAL/FOCUS] switch to [AUTO].

Manual shutter speed adjustment

Avoid recording under fluorescent light, mercury light or sodium light because the color and brightness of the playback image may change.

If you increase the shutter speed manually, the sensitivity lowers and accordingly the gain value increases

automatically, which may increase the noises on the screen. You may see vertical lines of light in the playback image of a brightly shining subject or highly reflective subject, but this is

not a malfunction.

During normal playback, image movement may not look smooth.

When recording in the extremely bright place, the color of the screen may change or flicker. If this happens adjust the shutter speed manually to 1/60 or 1/100.

Manual iris/gain adjustment

If the value does not become “OPEN”, you cannot adjust the gain value.

If the gain value is increased, the noise on the screen increases.

Depending on the zoom magnification, there are iris values that are not displayed.

ªShutter speed range

1/60 to 1/8000 seconds: Tape Recording Mode The shutter speed closer to 1/8000 is faster.

ªIris/gain value range

CLOSE (Closed), F16, ..., F2.0, OPEN (Opened) 0dB, ..., 18dB

Value closer to [CLOSE] darken the image. Value closer to [18dB] brighten the image. Values with dB are gain values.

24

Page 24
Image 24
Panasonic DVC20 Manual focus adjustment, Manual shutter speed/aperture adjustment, To restore to automatic adjustment