Panasonic DVC20 operating instructions Using the DV Cable for Recording Digital Dubbing

DVC20_Eng.book 28 ページ ２００５年１０月３１日 月曜日 午前１０時３６分

Edit mode

Using the DV Cable for Recording (Digital Dubbing)

By connecting other digital video equipment with DV terminal and the camera-recorder by using the DV cable (optional) 1, high-image-quality dubbing can be done in digital format.

≥Set to Tape Playback Mode. (Player/recorder)

1Connect the camera-recorder and digital video equipment with the DV cable.

DV

1

DV

2Set [ADVANCE] >> [REC STDBY] >> [YES]. (Recorder)

≥You do not have to follow this step when the remote control is used in the digital dubbing.

3Start playback. (Player)

4Start recording. (Recorder)

Press the [3] button to select [¥/;] icon.

≥Or, without operating step 2

While pressing the [¥REC] button on the remote control, press the [1] button.

¥REC A.DUB

V/REW PLAY FF/W

W

STILL ADV PAUSE STILL ADV VOL

STOP

5Press the [3] button to select the [¥/;] icon again or press the [;] button on the remote control to stop recording. (Recorder)

6Stop playback. (Player)

ªTo cancel the standby for recording

When the camera-recorder is standby for recording, press the [4] button and select the [∫] icon.

≥Do not plug or unplug the DV cable during dubbing, or the dubbing may not be completed properly.

≥If a picture (bilingual video, etc.) containing main sound and sub sound has been dubbed, select the desired sound by [SETUP] >> [AUDIO OUT] on playback.

≥Even if you use a device equipped with DV terminals such as IEEE1394, you may not be able to perform digital dubbing in some cases. For more information, see the instructions for equipment connected.

≥Regardless of the menu settings on the recorder, digital dubbing is carried out in the same mode as the [AUDIO REC] mode of the playback tape.

≥The images on the recorder monitor may be disturbed, but it does not affect the recorded images.

≥If a picture containing a copyright protection signal (copy guard) is recorded by the camera-recorder, the picture is distorted by mosaic-like patterns at playback.

≥When wide images are input, the display such as the menu screen or the operation icon is expanded horizontally.

≥While pictures are input from the DV terminal, the operation icon blinks on instead of appearing from the side of the screen when you press the [ENTER] button.

28