Panasonic DVD-F61 Accessories, Connection, Getting started, Before connection, Remote control

Getting started

Accessories

Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.

	(Only for U.S.A.) To order accessories contact 1-800-332-5368 or web site (http://www.panasonic.com).
	(For other areas) To order accessories, call the dealer from whom you have made your purchase.
∏ 1	Remote control	∏ 1	Audio/video cable	(K2KA6CA00001)

U.S.A. and Canada	(N2QAJB000070)	∏ 2 Remote control batteries
Other areas	(N2QAJB000071)

∏ 1 AC power supply cord		[Note]
		The included AC power supply cord is for use with this unit only. Do not
U.S.A. and Canada	(RJA0065-A)
		use it with other equipment.
Australia and N.Z.	(RJA0035-2X)
Asia	(RJA0019-2X)

Connection

Before connection

≥Disconnect the AC power supply cord.	≥The equipment connections described are examples.
≥Turn off all equipment and read the appropriate operating instructions.	≥Peripheral equipment and optional cables sold separately unless
	otherwise indicated.

Connection to a television

This page explains how to connect the unit to a television and set it up so you hear the audio through the television’s speakers. To get the full benefit from the powerful multi-channel audio found on DVDs, you should connect an amplifier and speakers.

Do not place the unit on amplifiers or equipment that may become hot.

The heat can damage the unit.

Connect your unit directly to your television.

Do not connect the unit through your video cassette recorder when setting up your home entertainment system, because the picture may not be played correctly due to the copy guard.

Basic connection to a television

Television

AUDIO VIDEO

IN IN

L

R

red white yellow

Audio/video cable

(included)

red white yellow

DIGITAL AUDIO OUT	AUDIO	COMPONENT VIDEO OUT
(PCM/BITSTREAM)	OUT		(480P/480I)
	L	PB	Y
OPTICAL
AC IN	R	PR
			VIDEO OUT	S VIDEO OUT

For better pictures

Television’s

COMPONENT VIDEO

IN terminals

Video cable (not included)

COMPONENT VIDEO OUT terminal

These terminals can be used for either interlace or progressive output (➜ page 7) and provide a purer picture than the S VIDEO OUT terminal. Connection using these terminals outputs the color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors.The description of the component video input terminals depends on the television or monitor (e.g. Y/PB/ PR, Y/B-Y/R-Y, Y/CB/CR). Connect to terminals of the same color. [Units\for\the\U.S.A.\and\Canada]

≥After making this connection, change the black level for a better picture. (➜ page 18, Video—Black Level Control)

Television’s
S VIDEO IN
terminal	S video cable (not included)

S VIDEO OUT terminal

The S video terminal achieves a more vivid picture than the VIDEO OUT terminal by separating the chrominance

(C)and luminance (Y) signals. (Actual results depend on the television.)

RQT6726

When making this connection, ensure you connect the audio cables to the corresponding audio input terminals on the television.

4