The remote control
∫Batteries
R6, AA,
≥Insert so the poles (i and j) match those in the remote control. ≥Do not use rechargeable type batteries.
Do not:
≥mix old and new batteries.
≥use different types at the same time. ≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries. ≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.
∫Use
Aim at the sensor (➜ page 3, Control reference guide), avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit.
Getting started
Quick setup
|
|
| [2] • [6] |
[1] | SLEEP | SETUP | OPEN/CLOSE |
|
|
|
[1] Press [Í] to turn on the unit.
[2] Press [SETUP] to show the QUICK SETUP screen.
DISC | DISC1 | DISC2 | DISC3 |
| 1 | 2 | 3 |
SEQUENTIAL | DISC4 | DISC5 |
|
| 4 | 5 | 6 |
FL SELECT |
|
|
|
| 7 | 8 | 9 |
GROUP | CANCEL |
|
|
|
| 0 | 10 |
SKIP | SLO |
| |
W/SEAR | |||
|
|
| CH |
OP | PAUSE | PL | |
ST |
|
| AY |
e.g. Units for U.S.A. and Canada
SETUP | QUICK SETUP |
| Select the menu language. |
| English |
| Français |
SELECT | Español |
| |
ENTER RETURN |
|
|
| DIRECTNAVIGATOR |
| PLAY LIST |
|
|
| TOP |
| MENU |
|
|
| MENU |
|
|
|
[3] | • [4] |
| ENTER |
|
|
[5] | • [6] |
|
|
|
|
|
|
|
| RETURN | |
|
| DISPLAY |
| RETURN |
|
POWER Í/I | DOUBLE | DISC 1 | 2 3 4 5 | ∫ ; 1 :/6 5/9 | DISC EXCHANGE DISC SKIP <OPEN/CLOSE |
[1] |
|
|
|
|
|
The QUICK SETUP screen appears when you press [SETUP] the first time after purchase and assists you to make necessary settings.
Preparation
Turn on the television and select the appropriate video input on the television to suit the connections for the player.
[3] Press [3, 4, 2, 1] to select the menu language and press [ENTER].
[4] Press [3, 4] to select “Yes” to continue and press [ENTER].
[5] Press [3, 4, 2, 1] to select the item and press [ENTER].
≥Audio Language (➜ page 18) ≥Subtitle Language (➜ page 18) ≥TV Aspect (➜ below) ≥Progressive Out (➜ page 18)
[6] Press [ENTER] and then [SETUP] to end the settings.
To return to the previous screen
Press [RETURN].
To access this screen again later
➜page 18,
∫TV Aspect
Select “4:3” (regular) or “16:9” (widescreen) to suit your television. If you have a regular 4:3 television, you can also select how video on some discs is shown (➜ page 18,
≥4:3 Pan&Scan (Factory preset)
Widescreen software is expanded to fill the screen of a 4:3 aspect television (unless prohibited by the producer of the disc).
≥4:3 Letterbox
Widescreen software is shown in the letterbox style on a 4:3 aspect television.
∫To enjoy progressive video
1.Connect to the component video input terminals on a 480P compatible television. (Video will not be displayed correctly if connected to an incompatible television.)
2.In QUICK SETUP, set “Progressive Out” to “Enable”.
3.Change Video output mode to “480P” (➜ page 17).
≥All televisions manufactured by Panasonic and that have 480P input connectors are compatible. Consult the manufacturer if you have another brand of television.
≥If the unit is connected to the television through VIDEO OUT or S VIDEO OUT, output will be interlace, irrespective of the settings.
RQT6726
7
