Panasonic DVD-S54 warranty Changing the player settings

Changing the player settings

1

Shows Setup menu.

2Select

Select the

OKmenu.

Register

3Select

Select the

OKitem.

Register

4 Select	1	2	3	Make the
	4	5	6
OK	7	8	9	settings.
	Register	0

5

Press to exit.

•The settings remain intact even if you switch the unit to standby.

•Underlined items are the factory preset.

The QUICK SETUP enables successive settings of the items in the shaded area.

“DISC” menu

	SETTING STATE	Display the current setting of the items below
	AUDIO	ENGLISH FRENCH SPANISH ORIGINAL1
	Choose the audio	OTHER ----2
	language.
	SUBTITLE	AUTO3 ENGLISH FRENCH SPANISH
	Choose the subtitle	OTHER ----2
	language.
	MENUS	ENGLISH FRENCH SPANISH OTHER ----2
settings	Choose the language	1 to 7: To prohibit play of DVD-Video with corresponding
	limit DVD-Video play.
	for disc menus.
	RATINGS	Setting ratings (When level 8 is selected)
	Set a ratings level to	0 LOCK ALL: To prevent play of discs without ratings levels.
player		ratings recorded on them.
		8 NO LIMIT
		When setting a ratings level, a password screen is shown.
the		Follow the on-screen instructions.
		Do not forget your password.
Changing	for “RATINGS”	A message screen will be shown if a DVD-Video
		then press [OK].
		exceeding the ratings level is inserted in the unit. Follow
		the on-screen instructions.
	PASSWORD	1. Select “CHANGE” and press [OK].
	Change the password	2. Enter the current password with the numbered buttons,
	( above).	3. Enter the new password with the numbered buttons,
		then press [OK].
		If “VERIFY” is displayed, please verify the password
RQTC0152		and insert it again.
	1 The original language designated on the disc is selected.

	2	Input a code number referring to the table ( page 20).
	3	If the language selected for “AUDIO” is not available, subtitles appear in that
	4	language (If available on the disc).
18		This may not work depending on the disc. If this does not work, change the
		aspect setting of television.

“VIDEO” menu

SETTING STATE		Display the current setting of the items below
TV ASPECT4		4:3PAN&SCAN
Choose the setting to suit your		The sides of the picture are cut off so it fills
television and preference.		the screen (unless prohibited by the disc).
To select how to show images		4:3LETTERBOX
made for 16:9 aspect screens		Picture is shown in the letterbox style.
on a 4:3 aspect television.
•	4:3PAN&SCAN	4:3ZOOM
•	4:3LETTERBOX	Scales down the horizontal edges of a 4:3
•	4:3ZOOM
		aspect ratio image.
To select how to show images		16:9NORMAL
made for 4:3 aspect screens		Stretches a 16:9 aspect ratio image horizontally.
on a 16:9 aspect television.
•	16:9NORMAL	16:9SHRINK
•	16:9SHRINK	Displays a 4:3 aspect ratio image in the center
•	16:9ZOOM
		of the screen.
		16:9ZOOM
		Adjusts the horizontal width to display a full
		screen image in 16:9 aspect ratio.
TV TYPE		STANDARD CRT LCD PROJECTION	PLASMA
Select to suit the type of television.
TIME DELAY		0 ms	20 ms	40 ms
When connected with an AV amplifier and Plasma display, adjust 60 ms			80 ms	100 ms
if you notice the audio is out of sync with the video.
STILL MODE		AUTO
Specify the type of picture		FIELD: The picture is not blurred, but picture quality is lower.
shown when paused.		FRAME: Overall quality is high, but the picture may appear blurred.
BLACK LEVEL		LIGHTER: When connected through VIDEO OUT or S
Change the black level of the		VIDEO OUT.
picture if you connected a television DARKER: When connected through COMPONENT VIDEO OUT.
through the COMPONENT VIDEO		• This setting is irrelevant when connected through the
OUT terminals.		HDMI AV OUT terminal.