Konica Minolta 750 manual Separating Copies by Sets Sort Setting

3

Basic Copy Operations Chapter 3

Basic Copy Operations

Separating Copies by Sets (“Sort” Setting)

0As the default setting, “Group” is selected.

0If “Offset” is selected while no finisher is installed, crisscross sorting will be performed.

Printed copies will be fed out and sorted in an alternating crisscross pat- tern if the following conditions are met.

-8-1/2 × 11 or 5-1/2 × 8-1/2 size paper is used.

-Paper of the same size and type is loaded with the w orientation in one paper tray and with the v orientation in another tray.

-The “Auto Paper Select” setting is selected.

-The “Auto Paper Select” setting is not selected when the “Mixed Origi- nal” setting is selected.

0If “Offset” is selected while a finisher is installed, printed copies are fed out and stacked on top of each other with each set shifted to separate it.

1In the Basic screen, touch [Finishing].

The Finishing screen appears.

2Touch [Sort].

–To separate each set of copies, touch [Offset]. To cancel the set- ting, touch [Offset] again to deselect it.

3Touch [OK].

The Basic screen appears again.

3-56 bizhub 750/600