Konica Minolta 750 Specifying Control Panel Settings Accessibility Mode, Bility Setting screen

Additional Copy Operations 4

4.7Specifying Control Panel Settings (Accessibility Mode)

This section contains details on the procedures for specifying control panel settings and adjusting the touch panel.

Displaying the Accessibility Setting Screen

%Press the [Accessibility] key.

– To exit the Accessi-	Accessibility
bility Setting screen
and return to the Ba-
sic screen, touch
[Close].
The Accessibility Setting
screen appears.

Chapter 4

To set the “Key Repeat Start/Interval Time” function

The length of time until the setting begins to change after holding down [+] or [-] in the Zoom screen or [Light] or [Dark] in the Density screen and the length of time for the value to change in Enlarge Display mode can be spec- ified.

The factory default setting for “Time To Start” is 0.8 second and the setting for “Interval” is 0.3 second.

0The settings specified for the “Key Repeat Start/Interval Time” function are only applied in the Enlarge Display mode.

1Display the Accessibility Setting screen. (To display the screen, refer to page 4-23)

Additional Copy Operations

bizhub 750/600 4-23