Konica Minolta 750 manual Application Functions Chapter

Application Functions 8

–To specify no shift either horizontally or vertically, touch [No Shift].

Specify the horizontal (left and right shift) or vertical (up and down shift) shift.

6Touch [Edit 2nd Side].

The Edit 2nd Side screen appears.

7Specify the shift direction and amount.

–For a horizontal shift, touch [Left] or [Right] to specify the shift di- rection.For a vertical shift, touch [Top] or [Bottom] to specify the shift direction. Both a horizontal shift and a vertical shift can be specified together.

–To specify no shift either horizontally or vertically, touch [No Shift].

–Touch [↔] to switch between the integer and the fraction, touch [–] and [+] to specify the width to be erased, and then touch [OK].

–If a decimal value is displayed in the screen, use the keypad to type in the setting. For details on switching between decimal and frac- tion values, refer to “System Setting” on page 12-14.

–When using the keypad to specify the settings, press the [C] (clear) key, and then type in the setting. If a value outside the allowable range is specified, the message “Input Error” appears. If “Input Er- ror” appeared or if the distance was incorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value.

Application Functions Chapter 8

bizhub 750/600 8-59