Konica Minolta 750 manual Additional Copy Operations Chapter

Additional Copy Operations 4

?Can the copy program name be corrected?

%To change the entered copy program name, touch the button whose name is to be changed, and then touch [Edit Name].

4Use the keyboard that appears in the touch panel to type in the name of the copy program.

–A name of up to 16 characters can be specified for the registered copy program. (For details, refer to page 13-2.)

5After typing in the name, touch [OK].

–The copy program can be given the same name as a copy program that has already been registered.

The Recall Copy Program screen appears again. The copy program is registered and a button with the entered copy program name appears.

?Can the specified settings for a copy program be checked?

%To check the programmed copy settings, touch the button for the desired copy program, and then touch [Check Job]. For details, re- fer to “Copying With Programmed Copy Settings (Mode Memory)” on page 4-14.

?How is a job deleted?

%Touch the button for the desired copy program, and then touch [Del.]. In the screen that appears, requesting confirmation to delete the copy program, touch [Yes] to delete the selected copy program.

Additional Copy Operations Chapter 4

bizhub 750/600 4-11