Konica Minolta 750 manual When the Message Misfeed detected. Appears, Troubleshooting

Troubleshooting 5

5.2When the Message “Misfeed detected.” Appears

If a misfeed occurs during copying or printing, the message “Misfeed detect- ed.” appears and the location of the misfeed is indicated in the screen. (mis- feed screen)

At this time, copying and printing cannot continue until the misfeed is ade- quately cleared.

If paper misfeeds have occurred at multiple locations, multiple “o” and ar- rows appear or flash. The flashing “o” and arrow indicate locations where the paper misfeed should be cleared first. Clear the paper misfeeds accord- ing to the messages that appear in the guidance display area.

Illustration button

Touch this button to display a screen that contains illustrations describing the recommended procedure for clearing the paper misfeed.

Illustration description area	Guidance display area
indicates the location of the paper	Displays the basic procedures for
misfeed, and the arrow indicates the	clearing paper misfeeds.
operation for clearing the misfeed.

Troubleshooting Chapter 5

Note

The illustration above shows all “o” and arrows displayed; however, nor- mally, all marks will not appear.

Error codes may appear in the illustration description area of the JAM lo- cation display screen. For details, contact your technical representative.

bizhub 750/600 5-5