Application Functions

3Touch [Print Position], and then select the printing position.

8

4

5

6

7

8

To make fine adjustments to the printing position, continue with step 4.

To not make fine adjustments, skip to step 6.

Touch [Change Adjustment].

Select the desired direction under “Left & Right Adjustment” or “Top & Bottom Adjustment”, and then use the keypad or touch [-] and [+] to specify the adjustment amount.

When using the keypad to specify the settings, press the [C] (clear) key, and then type in the setting.

If a value outside the allowable range is specified, the message “In- put Error” appears.

If “Input Error” appeared or if the distance was incorrectly entered, press the [C] (clear) key to erase the value, and then specify the cor- rect value.

Touch [OK] four times.

If necessary, specify any other copy settings.

Using the keypad, type in the desired number of copies.

Press the [Start] key.

Application Functions Chapter 8

bizhub 750/600

8-91

Page 364
Image 364
Konica Minolta 750 manual Application Functions Chapter