Konica Minolta 750 manual Touch OK four times Basic screen appears again

Copy Paper/Original 7

6Specify the length (X) and width (Y) of the paper, and then touch [OK].

–Touch [X] or [Y], touch [↔] to switch between the integer and the fraction, and then touch [–] and [+] to specify the size of the paper.

–If a decimal value is displayed in the screen, use the keypad to type in the setting. For details on switching between decimal and frac- tion values, refer to “System Setting” on page 12-14.

–If a decimal value is displayed in the screen and the specified value is outside the allowable range, the message “Input Error” appears. Type a value within the allowable range. If the value was incorrectly entered, press the [C] (clear) key to erase the value, and then spec- ify the correct value.

Copy Paper/Original Chapter 7

7Touch [OK] four times.

The Basic screen appears again.

Note

The selected size button is programmed with the entered paper size, so that the paper size is available to be selected again without having to be typed in. In addition, the size can be changed.

bizhub 750/600 7-19