Konica Minolta 750 manual Application Functions Chapter

8

Application Functions Chapter 8

Application Functions

–To cancel changes to the settings, touch [Cancel].

–To cancel the “Page Margin” function, touch [OFF].

–As a factory default, the margin position is set to “Auto”, and the margin width is set to “None”.

?Can “Auto” is specified?

%The factory default setting is “Auto”. Touch [Auto] to automatically determine the binding position according to the orientation of the positioned original. If the original length is 11-3/4 in. or less, a bind- ing position along the long side of the paper is selected. If the orig- inal length is more than 11-3/4 in., a binding position along the short side of the paper is selected.

5If “Left”, “Right” or “Top” was selected, use the keypad to type in the margin width.

–If “None” is selected, the margin width is set to 0 in. When making double-sided copies, the image orientation can adjusted without creating a filing margin.

–If a decimal value is displayed in the screen, use the keypad to type in the setting. For details on switching between decimal and frac- tion values, refer to “System Setting” on page 12-14.

–When using the keypad to specify the settings, press the [C] (clear) key, and then type in the setting.

–If a value outside the allowable range is specified, the message “In- put Error” appears. If “Input Error” appeared or if the distance was incorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value.

?How can the entered margin position be corrected?

%Without changing the margin width, change the margin position.

6Touch [OK].

7If necessary, specify any other copy settings.

8Using the keypad, type in the desired number of copies.

9Press the [Start] key.

8-56 bizhub 750/600