Konica Minolta 750 Stapling Copies Staple Settings Detail, When Finisher FS-602 is installed

Basic Copy Operations 3

Stapling Copies (Staple Settings)

!

Detail

4 to 12-1/4in. (width) × 7-3/4 to 18in. (length)

In order for the copies to be stapled, all of the following conditions must be met.

There are four Foolscap sizes: 8-1/4" × 13" w, 8-1/8" × 13-1/4" w, 8-1/ 2" × 13" w and 8" × 13" w. Any one of these sizes can be selected. For details, contact the service representative.

If the “Mixed Original” setting is selected, all copies must have the same paper width.

If a Staple setting is selected, the “Sort” setting is automatically selected.

A Staple setting cannot be used together with the “Offset” setting.

If a Staple setting is to be selected, select the orientation in which the original is positioned and the orientation of the page to be stapled, oth- erwise the copies may not be stapled as desired.

For details on specifying the original orientation, refer to “Selecting the Original Orientation (Original Direction Settings)” on page 3-20.

When Finisher FS-602 is installed

Paper Weight	Paper Size		Loading Capacity With a
			Staple Setting
16lb to 21-1/4 lb	11 × 17w, 8-1/2 × 14w,		1,000 sheets
	8-1/2 ×	11w/v, Exectivew/v,
	5-1/2 ×	8-1/2w/v, Foolscapw

	Number of Bound Pages	Maximum Number of Sets
Other than 11 ×	2 to 9 sheets	100 sets
17w
	10 to 20 sheets	50 sets
	21 to 30 sheets	30 sets
	31 to 40 sheets	25 sets
	41 to 50 sheets	20 sets

Basic Copy Operations Chapter 3

bizhub 750/600 3-59