Konica Minolta 750 manual Separating Copies by Pages Group Setting

Basic Copy Operations 3

Separating Copies by Pages (“Group” Setting)

0As the default “Group” is selected.

0If “Offset” is selected while no finisher is installed, crisscross sorting will be performed.Printed copies will be fed out and sorted in an alternating crisscross pattern if the following conditions are met.

-8-1/2 × 11 or 5-1/2 × 8-1/2 size paper is used.

-Paper of the same size and type is loaded with the w orientation in one paper tray and with the v orientation in another tray.

-The “Auto Paper Select” setting is selected.

-The “Auto Paper Select” setting is not selected when the “Mixed Origi- nal” setting is selected.

0If “Offset” is selected while a finisher is installed, printed copies are fed out and stacked on top of each other with each set shifted to separate it.

1In the Basic screen, touch [Finishing].

The Finishing screen appears.

2Touch [Group].

–To separate each set of pages, touch [Offset]. To cancel the “Off- set” setting, touch [Offset] again to deselect it.

3Touch [OK].

The Basic screen appears again.

Basic Copy Operations Chapter 3

bizhub 750/600 3-57