Konica Minolta manual Adjusting the Half-Fold Position, Bizhub 750/600 12-47

Utility 12

Note

Enter the value by mm using the keypad. Refer to the conversion rate be- low. 1 in. = 25.4 mm

Adjusting the Half-Fold Position

The half-fold position when printing with the “Fold & Staple” function can be adjusted.

0Use the “Fold & Staple” function to print a single sample copy, and then perform the adjustment while checking the sample that was created.

1Display the Administrator Setting screen.

–For details on displaying the Administrator Setting screen, refer to “Displaying the Administrator Setting Screen” on page 12-39.

2Touch [1 System Setting].

The System Setting screen appears.

3Touch [7 Expert Adjustment].

The Expert Adjustment screen appears.

4Touch [5 Finisher Adjustment].

The Finisher Adjustment screen appears.

5Touch [2 Half-Fold Position].

The Half-Fold Position screen appears.

6Touch the button for the paper size to be set.

7Touch [Test Copy].

The Test Copy screen appears.

Utility Chapter 12

bizhub 750/600 12-47