Sharp PG-D4010X Adjusting the Projected Image “SCR - ADJ” Menu, Setting the Resize Mode, Features

Adjusting the Projected Image (“SCR - ADJ” Menu)

	Pict.	SCR-ADJ	PRJ	Net.	Help
	Resize			Border
	Image Shift		0
	Keystone		0
	Overscan			On
	OSD Display			On
	Closed Caption			Off
	Background			Logo
	PRJ Mode			Front
	Language			English
	SEL./ADJ.		ENTER		END

1 Setting the Resize Mode

Note

•For details of the Resize mode, see pages 30 and 31.

•You can also press RESIZE on the remote control to set the resize mode. (See page 30.)

2Adjusting the Image

Position

You can move the projected image vertically.

O button Q button

Note

•This function only works in some RESIZE modes. (See pages 30 and 31.)

Menu operation n Page 38

3 Keystone Correction

When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction.

Select “Keystone” on the “SCR-ADJ” menu and adjust with the slide bar.

See page 28 for details of Keystone Correction.

Q button O button

Note

•The Keystone Correction can be adjusted up to an angle of approximately ±40 degrees (when “Resize” is set to “Normal”).

•You can also press KEYSTONE on the remote control or on the projector to adjust Keystone Correction.

4 Setting the Overscan

This function allows you to set the overscan area (display area).

Selectable	Description
items
On	The input area is displayed without the
	screen edges.
Off	The whole input area is displayed.

Note

•You can set “Overscan” for the following input signals (Computer, DVI-D Video and DVI-

Analog).

—480P, 540P, 576P, 720P, 1035I and 1080I/1080P

•If noise appears at the screen edges when “Off” is selected, set the function to “On”.

•Also see “About Copyrights” on page 31.

Features Useful

43