Sharp PG-D4010X quick start Setting up the Projector Network Environment “Network” Menu Continued

Setting up the Projector Network Environment (“Network” Menu) (Continued)

Menu operation n Page 38

2 DHCP Client Setting

Connect the LAN cable before turning the projector on. If not, the DHCP Client function does not work.

Selectable items	Description
On	Obtains confi guration
	parameters for TCP/IP network
	automatically.
Off	Sets the TCP/IP manually.

Select “On” for “DHCP Client”. “Obtaining IP Address...” appears, then the menu screen appears. Confirm the parameters of IP Address, Subnet Mask and Gateway on the TCP/IP screen.

If the DHCP server is not available, “Could not obtain IP Address.” appears.

In this case, set the TCP/IP manually. (See the item 3.)

3 TCP/IP Setting

Set the TCP/IP manually.

1 Select “Off” for “DHCP Client”, then press ENTER.

2 Select “TCP/IP”, then press

ENTER.

3 Enter “IP Address” using P, R, Q and O, then press ENTER.

					Network
Setting the TCP/IP
IP Address	1	9	2	.	1 6 8	. 1 5 0		. 0 0 2
Subnet Mask	2 5 5			.	2 5 5	.	2 5 5	.	0 0 0
Gateway	0 0 0			.	0 0 0	.	0 0 0	.	0 0 0

4 Enter “Subnet Mask” using P, R,

Q and O, then press ENTER.

5 Enter “Gateway” using P, R, Q and O, then press ENTER.

Selectable items	Description
IP Address	Factory default setting:
	192.168.150.002
	Enter an IP address
	appropriate for the network.
Subnet Mask	Factory default setting:
	255.255.255.000
	Set the subnet mask to the
	same as that of the computer
	and equipment on the
	network.
Gateway	Factory default setting:
	000. 000. 000. 000
	* When not in use, set to “000.
	000. 000. 000”.

Note

•Confi rm the existing network's segment (IP address group) to avoid setting an IP address that duplicates the IP addresses of other network equipment or computers. If “192.168.150.002” is not used in a network with an IP address of “192.168.150.XXX”, you don't have to change the projector IP address.

•For details about each setting, consult your network administrator.

4Confirming the Projector Information

You can confirm the MAC address and projector name.

Selectable items	Description
MAC Address	The MAC address of the
	projector is displayed.
Projector	The projector name is
	displayed.

Note

•For information on how to change the projector name, see “SETUP MANUAL” contained in the supplied CD-ROM.

50