Sharp PG-D4010X Adjust the projected image, Correct trapezoidal distortion, Select the INPUT mode

4. Adjust the projected image

1Adjusting the focus.

2Adjusting the height.

3Adjusting the picture size.

5. Correct trapezoidal distortion

Correcting trapezoidal distortion using Keystone Correction.

On the projector

Shrinks upper side.

On the remote control

BP. 27

Shrinks

lower side.

Quick Start

BP. 28

6. Select the INPUT mode

Select the “COMPUTER” using INPUT on the projector or COMPUTER on the remote control.

On the	On the remote	INPUT list	On-screen display (RGB)
projector	control	INPUT	COMPUTER
		COMPUTER	RGB
			1024 ⋅ 768
		D DVI-D Computer

DDVI-D Video

•When you press INPUT on the projector, the INPUT list appears.

Press / to switch the INPUT mode.

BP. 29

7.Turn the computer on

8.Turn the power off

Press STANDBY/ON on the projector or STANDBY on the remote control, and then press the button again while the confirmation message is displayed to put the projector into standby mode.

On-screen display

On the	On the remote
projector	control

BP. 26

17