Sharp PG-D4010X quick start Keylock Function, Locking the Operation Buttons on the Projector, Info

Adjusting the Projector Function (“PRJ - ADJ” Menu) (Continued)

Keylock Function

Locking the Operation

Buttons on the Projector

Use this function to lock the operation buttons on the projector.

■Locking the Operation Buttons

Hold down ENTER on the projector for about 5 seconds while the projector is being turned on.

On-screen display

•The keylock function does not affect the operation with the remote control buttons.

•You cannot use the keylock function while the projector is warming up.

■Taking the Keylock off

Hold down ENTER on the projector for about 5 seconds.

On-screen display

•When the projector is in standby mode, you can release the keylock by holding down ENTER and STANDBY/ON on the projector simultaneously for about 5 seconds.

Info

•Keylock cannot be set while the projector is: displaying the “Menu” screens, in standby mode, warming up, changing input signals, operating “Auto Sync” function, in “FREEZE” mode or on the “System Lock” screen during warming up.

48