Sharp PG-D4010X Rear View, Terminals, Using the Carrying Handle, Using the Kensington Lock

Numbers in Zrefer to the main pages in this operation manual where the topic is explained.

Introduction

Rear View

Terminals

MONITOR OUT terminal		23
(Output terminal for computer
RGB, component and DVI analog
signals. Shared for COMPUTER/
COMPONENT and DVI-I)
Terminal for connecting a monitor.
COMPUTER/COMPONENT input		21
terminal		22
Terminal for computer RGB and
component signals.
DVI-I input	21
terminal	22
Terminal for DVI
digital, computer
RGB and
component signals.
AUDIO 1 input	23
terminal
AUDIO OUT	23
terminal
Audio output terminal of equipment
connected to the audio input terminal.
AC socket	25
Connect the
supplied power cord.
Speaker	46
Carrying handle
Remote control	15
sensor

22VIDEO input terminal Terminal for connecting video equipment.

22S-VIDEO input terminal Terminal for connecting video equipment with an S-video terminal.

23 AUDIO 2 input terminal

25LAN terminal

Terminal for controlling the projector using a computer via network.

34USB terminal Terminal connecting with the USB terminal

on the computer for using the supplied remote control as the computer mouse.

23RS-232C terminal Terminal for controlling the projector using a computer.

46 Speaker

Security bar

Kensington Security

Standard connector

Using the Carrying Handle

When transporting the projector, carry it by the carrying handle on the side.

• Always close the lens shutter to prevent damage to the lens when transporting the projector.

• Do not lift or carry the projector by the lens as this may damage the lens.

Using the Kensington Lock

•This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector.

13