Sharp PG-D4010X “Network” menu, The items you can set with the “Help” menu, Features, Useful

“Network” menu

	Pict.		SCR	PRJ		Network	Help
	Password					Disable
	DHCP Client					Off
	TCP/IP
		MAC Address		XX : XX : XX : XX : XX : XX
		Projector		XX-XXXX
		SEL./ADJ.			ENTER		END
“Help” menu
	Pict.		SCR	PRJ		Net.	Help
	There is no picture or audio
	Vertical stripes or flickering image appear
	Data image is not centered
	Color is faded or poor
	Picture is dark
	The image is distorted
	It is difficult to hear audio
	Reset all adjustments to default settings
		SEL.			ENTER		END

Main menu

Network	Password [Enable/Disable]
Page 49	Page 49

DHCP Client [On/Off]

Page 50

TCP/IP

Page 50

MAC Address

Page 50

Projector

Page 50

The items you can set with the “Help” menu

“Help” menu n Page 51

•Vertical stripes or fl ickering image appear Auto Sync/Clock/Phase

•Data image is not centered

COMPUTER or DVI-Analog input

Auto Sync/H-Pos/V-Pos/Resolution

DVI-D input

Switch to Plug-and-Play data

*Switch to Plug-and-Play data in the following cases.

DVI-D Computer input

Standard	: Aspect ratio 4:3 or 5:4 signals
	such as 1024x768
Enhanced1 : Wide-screen signals such as
	1280x800 are prioritized.
Enhanced2 : Wide-screen signals such as
	1366x768 are prioritized.
DVI-D Video input
Standard	: Normal
Enhanced	: Select this item when no
	image is projected in
	“Standard” mode.

•Color is faded or poor COMPUTER or DVI input

Signal type: Auto/RGB/Component S-VIDEO or VIDEO input

Video System: Auto/PAL/SECAM/

NTSC3.58/NTSC4.43/

PAL-M/PAL-N/PAL-60

DVD-D input

Dynamic range: Auto/Standard/Enhanced

*The selectable items vary depending on the input signal and the selected input mode.

•It is diffi cult to hear audio Balance/Treble/Bass

Features Useful

37