Konica Minolta 750 manual Additional Copy Operations Chapter

Additional Copy Operations

4

7Press the [Proof Copy] key to print another sample copy.

–If copying stops while the proof copy screen or the Change Setting screen is displayed after the proof copy was printed, press the [Re- set] key.

Otherwise, from the list of jobs on the left side of the touch panel, select the proof copy job that stopped, and then touch [Delete]. In the screen that appears, requesting confirmation to delete the copy program, touch [Yes].

–Whether an image or list appears in the sub display area can be se- lected by using the “Sub Screen Display ON/OFF” parameter in Utility mode. (For details, refer to page 12-19.)

–If an automatic panel reset operation is performed while the proof copy for a job is being checked, that job is stored in the memory.

–To stop the proof copy while scanning or printing, perform the op- eration described in “Stopping Scanning/Printing” on page 3-74.

–If multiple copies have been specified, another sample copy can be printed.

8Touch [Print].

– The remaining copies begin to be printed.

Additional Copy Operations Chapter 4

bizhub 750/600 4-7