Konica Minolta 750 manual Application Functions Chapter

8

Application Functions Chapter 8

Application Functions

–If a decimal value is displayed in the screen, press the [C] (clear) key, and then use the keypad to type in the setting. For details on switching between decimal and fraction values, refer to “System Setting” on page 12-14.

If a value outside the allowable range is specified, the message “In- put Error” appears. If “Input Error” appeared or if the distance was incorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value.

7Touch [OK], and then touch [OK] in the next screen that appears.

8If necessary, specify any other copy settings.

9Using the keypad, type in the desired number of copies.

10 Press the [Start] key.

8-72 bizhub 750/600