8

Application Functions Chapter 8

Application Functions

Printing the Distribution Number (“Set Numbering” function)

!

Detail

The distribution number is normally printed as a four-digit number. If “Start Number” is set to “1”, “0001” is printed.

To copy using the “Set Numbering” function

0Printing is not possible with “Set Numbering” function if the hard disk drive is not installed.

1In the Stamp/Overlay screen, touch [Set Numbering].

For details on displaying the Stamp/Overlay screen, refer to “To display the Stamp/Overlay screen” on page 8-79.

The Set Numbering screen appears.

2Using the keypad, type in the starting number.

The starting number can be set between 0 and 9999.

The distribution number is normally printed as a four-digit number. If “Start Number” is set to “1”, “0001” is printed.

To cancel changes to the settings, touch [Cancel].

To cancel the “Set Numbering” function, touch [OFF].

8-88

bizhub 750/600

Page 361
Image 361
Konica Minolta 750 manual Application Functions, To copy using the Set Numbering function