Konica Minolta 750 manual Application Functions Chapter

8

Application Functions Chapter 8

Application Functions

4Touch [Center Erase].

The Center Erase screen appears.

5Touch [–] and [+] or use the keypad to specify the width to be erased.

–Touch [↔] to switch between the integer and the fraction, touch[–] and [+] to specify the width to be erased, and then touch [OK].

–If a decimal value is displayed in the screen, use the keypad to type in the setting. For details on switching between decimal and frac- tion values, refer to “System Setting” on page 12-14.

–When using the keypad to specify the settings, press the [C] (clear) key, and then type in the setting.

–If a value outside the allowable range is specified, the message “In- put Error” appears. If “Input Error” appeared or if the distance was incorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value.

–To cancel the “Center Erase” function, touch [OFF].

–To cancel changes to the settings, touch [Cancel].

6Touch [OK] twice.

7If necessary, specify any other copy settings.

8Using the keypad, type in the desired number of copies.

8-74 bizhub 750/600