Konica Minolta 750 manual Touch 3 Punch Unit Vert. Position

Utility 12

Adjusting the Hole-Punching Positions (Punch Unit Vert. Position)

When ZU-602 is installed, the vertical position of the punched holes can be adjusted.

0Use the “Punch” function to print a single sample copy, and then perform the adjustment while checking the sample that was created.

1Display the Administrator Setting screen.

–For details on displaying the Administrator Setting screen, refer to “Displaying the Administrator Setting Screen” on page 12-39.

2Touch [1 System Setting].

The System Setting screen appears.

3Touch [7 Expert Adjustment].

The Expert Adjustment screen appears.

4Touch [5 Finisher Adjustment].

The Finisher Adjustment screen appears.

5Touch [3 Punch Adjustment].

The Punch Adjustment screen appears.

6	Touch [3 Punch Unit Vert. Position].	12
		Chapter
		Utility

The Punch Unit Vert. Position screen appears.

bizhub 750/600 12-55