Konica Minolta manual Bizhub 750/600

12 Utility

8Press the [Start] key.

A test pattern is printed.

9Touch [Close].

The Leading Edge Adjustment screen appears again.

10 Check the distance (a) from the starting print position of the test pat- tern to the edge of the paper.

a

Utility Chapter 12

11 If the desire print results are not achieved, change the adjustment

–To increase distance (a), touch [+].

–To reduce distance (a), touch [–].

–To scroll through the values quickly, touch [+] or [–] continuously.

12 Repeat steps 7 through 11 until the desired print results are achieved. 13 Touch [OK].

–To cancel changes to the settings, touch [Cancel]. The print position is adjusted.

Note

Enter the value by mm using the keypad. Refer to the conversion rate be- low. 1 in. = 25.4 mm

12-42 bizhub 750/600