Konica Minolta 750 manual Copy Paper/Original Chapter

Copy Paper/Original 7

4Specify the X and Y sides of the paper, and then touch [Store].

–Touch [X], touch [↔] to switch between the integer and the fraction and then touch [–] and [+] to type in the length of side X. (5-1/2 in. to 18 in.)

–Touch [Y], touch [↔] to switch between the integer and the fraction and then touch [–] and [+] to type in the length of side Y. (3-15/16 in. to 12-5/16 in.)

–Check the illustration in the screen for the sides that are considered as X and Y.

–If a decimal value is displayed in the screen, use the keypad to type in the length. For details on switching between decimal and fraction values, refer to “System Setting” on page 12-14.

–If a decimal value is displayed in the screen and the specified value is outside the allowable range, the message “Input Error” appears. Type a value within the allowable range. If the value was incorrectly entered, press the [C] (clear) key to erase the value, and then spec- ify the correct value.

5Touch [memory1] or [memory2].

?How can the name of the stored paper size be changed?

%Touch [Custom Name], then type the new name into the Custom Name screen that appeared, and then touch [OK].

%Use the keyboard that appeared in the screen to type in the new name, and then touch [OK].

Copy Paper/Original Chapter 7

bizhub 750/600 7-15