Konica Minolta 750 manual Before Making Copies Chapter

Before Making Copies 2

5Position the original to be copied.

?How is the original positioned?

%For details on positioning the original to be copied, refer to “Posi- tioning the Original” on page 3-7.

6Press the [Start] key.

The original is scanned, and the job is added to the list of queued jobs.

7Check that the original has finished being scanned, and then position the next original.

8Specify new copy settings and the desired number of copies, and then press the [Start] key.

–After the machine has finished warming up, the jobs will automati- cally be printed in the order that they were queued.

?How is the printing of a job stopped?

%Press the [Stop] key. For details, refer to “Stopping Scanning/Print- ing” on page 3-74.

!

Detail

While the machine is warming up to begin printing after it is turned on us- ing the sub power switch, copy settings can be specified and an original can be scanned to reserve a copy job.

After the machine has finished warming up, the scanned image will be printed.

The machine takes about 5 minutes (bizhub 750)/4 minutes 30 seconds (bizhub 600) to warm up at normal room temperature (68°F) when the control panel is turned on using the sub power switch after the machine is turned on using the main power switch.

The output order can be changed or jobs can be deleted from the Current Jobs list of the Job List screen. For details, refer to “Managing Jobs (Job List)” on page 11-2.

Before Making Copies Chapter 2

bizhub 750/600 2-25