Konica Minolta 750 When Thick Paper Is Loaded Into a Paper Tray, To set the conveyance lever

Before Making Copies 2

Reminder

Be sure to insert the trailing-edge guide at the position for the specified size. If there is space between the trailing-edge guide and the paper, the paper will not be fed correctly.

Make sure that the lateral guide is correctly positioned against the edge of the loaded paper. If the lateral guide is not positioned correctly, the pa- per size will not be correctly detected.

Do not close the paper tray with too much force, otherwise the weight of the tray and paper will apply an impact to the machine that may cause damage.

When Thick Paper Is Loaded Into a Paper Tray

If thick paper is loaded into a paper tray, the bypass tray or the LCT, the con- veyance lever must be correctly set in order to prevent paper misfeeds.

To set the conveyance lever

1Open the front doors (left and right).

2Turn lever M4 to the left, and then pull out the ADU unit.

Lever M4

Before Making Copies Chapter 2

bizhub 750/600 2-53