Konica Minolta 750 manual Reset Setting, On/ Off

Utility Chapter 12

12	Utility
	Reset Setting

Parameter		Description	Settings (Default set-
			tings are underlined.)
System Auto Reset		Specify the desired length of time until	Priority mode:
		the automatic system reset operation is	Copy/ Scan
		performed.	System Auto Reset
		• Priority Mode:	Time:
		Select the setting for the mode that	OFF/ 1 to 9 minutes:
		the machine enters when the auto-	1 minute
		matic system reset operation is per-
		formed.
		• System Auto Reset Time:
		Specify the setting for the desired
		length of time until the automatic sys-
		tem reset operation is performed.
Auto Reset		Select the setting for the desired length	Copy: OFF/ 1 to 9 min-
		of time until the automatic panel reset	utes: 1 minute
		operation is performed for each mode.	Scan: OFF/ 1 to 9 min-
			utes: 1 minute
Job	When ac-	Select whether or not the settings are re-	Reset/ Do Not Reset
Reset	count is	set when the user has changed.
	changed	This machine detects that the user has
		changed when the optional key counter
		has been removed or when the [Access]
		key is pressed after entering user au-
		thentication and account track informa-
		tion.
	When orig-	Select whether or not the settings are re-	Reset/ Do Not Reset
	inal is set	set when a document is loaded into the
	on ADF	ADF.
	When Next	Staple Setting:	ON/ OFF
	Job is se-	Select whether the same Staple setting
	lected	from the previous job is set or the setting
		is canceled when that job begins and the
		settings for the next job can be speci-
		fied.
		Original Set/Bind Direction:	ON/ OFF
		Select whether the same Original Direc-
		tion and Margin settings from the previ-
		ous job are set or the settings are
		canceled when that job begins and the
		settings for the next job can be speci-
		fied.
		Reset Data After Job:	ON/ OFF
		Select whether the same settings for a
		scan operation from the previous job are
		set or the settings are canceled when
		that job is completed and the settings for
		the next job can be specified. (However,
		even if “OFF” is selected, the destination
		is cleared.)

12-16 bizhub 750/600