Konica Minolta 750 manual Basic Copy Operations Chapter

Basic Copy Operations 3

Scanning the Original in Separate Batches (“Separate Scan” Setting)

A large original can be divided and scanned in a number of batches.

A maximum of 100 original pages can be loaded into the ADF at one time. However, by copying with the “Separate Scan” setting, an original that ex- ceeds 100 pages can be scanned and treated as a single copy job. In addi- tion, the scanning location can be switched between the original glass and the ADF during the scanning operation.

0Do not load more than 100 sheets or so many sheets that the top of the stack is higher than the , mark, otherwise an original misfeed or damage to the original may occur.

1Position the original to be copied.

–When using the original glass, place the first page of the original on the original glass with the side to be copied facing down.

–When using the ADF, load the original with the pages in order and the first page on top. Up to 100 sheets can be loaded at one time.

2In the Basic screen, touch [Separate Scan].

–To cancel the “Separate Scan” setting, touch [Separate Scan] again to deselect it.

Basic Copy Operations Chapter 3

bizhub 750/600 3-11