Konica Minolta manual Bizhub 750/600

Utility Chapter 12

12 Utility

7Touch [Test Copy].

The Test Copy screen appears.

8Press the [Start] key.

The sample copy is printed.

9Touch [Close].

The Center Staple Position screen appears again.

10 Compare the width of the left pages of the copy sample with the width of the right pages to check for the center of the paper.

11 If the desire print results are not achieved, change the adjustment value.

– If the staple position is too far to the right of the center of the paper, touch [+] (be- tween 0.1 mm and

12.7mm).

–If the staple position is too far to the left of the center of the pa- per, touch [–] (be- tween 0.1 mm and

12.8mm).

–To scroll through the

values quickly, touch [+] or [–] continuous- ly.

12 Repeat steps 6 through 11 until the desired print results are achieved. 13 Touch [OK].

–To cancel changes to the settings, touch [Cancel] .

12-46 bizhub 750/600