Konica Minolta 750 manual To reserve a copy job

Basic Copy Operations Chapter 3

3 Basic Copy Operations

3.13Scanning the Next Original To Be Copied While a Copy Job Is Being Printed (Next Job Reservation)

The settings for the next copy job can be specified and the document can be scanned while a copy operation is being performed so that it can be printed once the current copy operation is finished.

To reserve a copy job

0Up to 51 copy jobs, including the current copy job, can be reserved.

0A copy job can be reserved after scanning of the positioned original is fin- ished. A copy job cannot be reserved while an original is being scanned.

0If Utility Setting parameter “Copy Operating Screen” is set to “ON”, [Pro- gram Next Job] appears. Touch [Program Next Job], and then specify the copy settings for the next copy job.

For details on specifying the “Copy Operating Screen” parameter, refer to “Display Setting” on page 12-19.

0For details on positioning the original, refer to “Positioning the Original” on page 3-7.

0To cancel a reserved copy job, display the Basic screen for the reserved copy job, and then press the [Stop] key. For details, refer to “Performing Operations on Jobs” on page 11-6.

1Press the [Start] key to begin scanning and outputting the current copy job.

The Basic screen for reserving a copy job appears.

3-72 bizhub 750/600