Konica Minolta 750 manual Automatically Conserving Energy Sleep Mode

Before Making Copies 2

Automatically Conserving Energy (Sleep Mode)

If no operation is performed for a specified length of time, the machine auto- matically enters a mode where it conserves energy.

Although the machine conserves more energy in Sleep mode than in Low Power mode, the machine must warm up when Sleep mode is canceled to begin printing again, therefore taking more preparation time than Low Power mode.

As the factory default, the machine enters Sleep mode after 90 minutes.

To recover from Sleep mode

1Press the [Power Save] key.

2The machine can receive jobs while it is warming up.

–The touch panel comes on again and, after the machine has fin- ished warming up, it is ready to begin printing.

Note

The Sleep mode can also be canceled by pressing any key in the control panel or by touching the touch panel.

!

Detail

As the factory default, a machine with optional equipment installed enters Low Power mode if no operation is performed for 15 minutes, and then the machine enters Sleep mode after 90 minutes have elapsed.

The length of time until the machine enters Sleep mode can be changed. For details, refer to “System Setting” on page 12-26.

Before Making Copies Chapter 2

bizhub 750/600 2-29