Konica Minolta 750 manual Application Functions, To copy using the OHP Interleave function

Application Functions 8

To copy using the “OHP Interleave” function

0Finishing settings, such as the Staple, Punch and Folding settings, can- not be used. The copies are fed into the main tray of optional finisher FS- 504/FS-602.

With the “OHP Interleave” function, the original cannot contain pages of mixed sizes.

0The Finishing setting cannot be changed.

0The number of copies is set to “1” and cannot be changed.

0One interleaf will be inserted between overhead projector transparencies.

0Load the overhead projector transparencies into the bypass tray one at a time in the v orientation.

0Specify that the overhead projector transparencies are loaded into the bypass tray. For details, refer to “Order for Selecting the Paper Trays” on page 7-7.

1Position the original to be copied.

–For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7.

2Position overhead projector transparencies into the bypass tray.

–Use interleaf paper with the same size as the overhead projector transparencies, and load them in the v orientation.

–For details on loading paper into the bypass tray, refer to “Loading Paper Into the Bypass Tray” on page 2-44.

3Select “OHP” for the paper in the bypass tray.

Touch [Paper] in the Basic screen, touch the button for the bypass tray, touch [Change Tray Settings], and then touch [OHP].

4Touch [OK].

The Paper screen appears.

Application Functions Chapter 8

bizhub 750/600 8-3