Konica Minolta 750 manual Copy Paper/Original Chapter

7

Copy Paper/Original Chapter 7

Copy Paper/Original

3Touch [Custom Size].

–The Paper Size screen that appears differs depending on the paper size type that is selected.

4Type in the length (X) and width (Y) of the paper.

–Touch [↔] to switch between the integer and the fraction, and then touch [–] and [+] to type in the length of side X. (5-1/2 in. to 18 in.)

–Touch [↔] to switch between the integer and the fraction, and then touch [–] and [+] to type in the length of side Y. (7-3/16 in. to 12-3/ 8 in.)

–If a decimal value is displayed in the screen, use the keypad to type in the length. For details on switching between decimal and fraction values, refer to “System Setting” on page 12-14.

–If a decimal value is displayed in the screen and the specified value is outside the allowable range, the message “Input Error” appears. Type a value within the allowable range. If the value was incorrectly entered, press the [C] (clear) key to erase the value, and then spec- ify the correct value.

5Touch [OK].

7-28 bizhub 750/600