Proxim AP-2000 manual Power LED turns green when the unit is operational

Getting Started

Figure 2-7 Slide a PC Card into the AP

5.Attach one end of an Ethernet cable to the AP's Ethernet port and the other end to a network hub or switch.

6.Connect the unit to a power source.

7.Wait for the power LED to turn green before proceeding.

Figure 2-8 Power LED turns green when the unit is operational

8.Conduct a Site Survey to determine the best location for your device.

9.Once you have chosen a final location for your unit, mount the wall bracket and the processor module and place the cover onto the unit as shown.

Figure 2-9 Wall mounting the AP

21